Afinia ES360 3D Scanner Review
Afinia ES360 3D Scanner Review
Minnesota 3D printer manufacturer Afinia has peacefully been producing their line of high-quality desktop 3D printers for individual years now, sadly for many of their fans to little fanfare. Even after receiving abundance of accolades and industry honors, the brand, while well regarded and successful, never resembled to garner the same amount of buzz that many lesser 3D printers have. But with the approaching release of their H800 3D printer, the industries particular company might conclusively be getting the awareness that they justify. Early reports of the new H800 recommend that it is a moderately prominent machine and a big leap in essence from their already impressive H480. And before a single unit has even released it has already taken home it’s the first grant. They just acquired the RAPID 2015 Exhibitor Innovation Award, whichever is awarded to the many innovative outputs featured at the RAPID 3D printing organization.
The Afinia ES360 desktop 3D scanner generates printable 3D illustrations with high efficiency for a range of productive 3D printing statements. The scanner is a complete fit for educators, designers, and home hobbyists contemplating to increase the inclinations of their 3D device. With a cheap cost point and rapid, precise scanning (~0.1mm), the ES360 gives details and fulfillment related to a completion level scanner.
Using protected, white light scanning, the ES360 Desktop 3D Scanner is easy enough for anyone to use. Just “click” the start button, and the scanning manner will convert your receiver in a 3D representation that can then compose on a 3D printer, like Afinia’s award-winning H480 or H800. The ES360 is lightweight, at lower than 8 lbs, allowing for comfortable carrying, also.
The ES360 is the single two-scan-mode scanner on the business. Choose to attach automated scan or free scan, depending on your qualifications and the dimension of the gizmo. Automatic scan mode answers for a max scan size of 215x215x200mm while the free examine method enables for a maximum scan area of 700x700x700mm.
The scanner can work reasonably speedy, as it can complete its automatic scan cycle in only three minutes. Some competing turntable scanning systems can become much longer. However, the three-minute time frame is only for the mechanical serving of the scan; processing and transformation to a proper 3D model takes a bit more time. The good news is that the method can be automated, and you can push the start button and walk away to do additional work while the scanner is working.
It looks like Afinia is now further developing their line of products with their ES360 desktop 3D scanner. The ES360 uses white light scanning to efficiently generate profoundly detailed 3D printable models in a fraction of the time that laser scanners expect. Afinia says that the ES360 was designed to be utilized by anyone, and can capture an entirely 3D printable model with perfectly the impact of a button. The new turntable style 3D scanner is an ideal compliment for their new 3D printer, both in style and in ease of use and is being trained squarely at the education, hobbyist, and 3D designer markets.
There is a substantial abundance of cables to plug in—for correlating the cameras, projector, turntable plus PC operating Afinia’s software. It might be satisfying to have an empty table on which to set up all this stuff.
When you achieve the assembly, it’s a bit of a cable jungle. While the ES360 is more or less portable, you probably want to set it up enduringly on a table to withdraw the effort of having to install everything up frequently.
Once you’re set up—and by set up, I meant that you’ve correctly cabled everything and placed the ES360 projector/camera unit accurately on its marks on the supplied sheet—you’re ready to begin scanning.
Thoroughly, almost. There is one very strange problem I noted while my first struggles to practice the scanner. For some analysis, the scanner would not project the structured light design on the object. Eventually, after a request to the paramount Afinia support line, it was concluded that this button was the obstacle. It’s the control switch for the projector, and it’s lightened with a blue LED—whether it’s off or on! When you primary power up the scanner, the switch lights blue, but it is switched off! You require pressing the button to light up the projector. And, of course, it continues blue ultimately this process.
You’ll also need to connect the Afinia ES360 software on your processor. Is a straightforward means, while you must present a license key that appears with your equipment.
I must say, nevertheless, that the software is for Windows-based systems only, and there are no transcriptions for different programs. No difficulty, I thought, I’ll just boot Windows natively on my MacBook.
Entirely, it applies out that this does not operate. In spite of valiant efforts by Afinia and my support, the approximately current MacBook was unable to run the Afinia software correctly, having many difficulties with the High-Definition Multimedia Interface (HDMI).
My recommendation: Do not venture to use the ES360 unless you have a non-Mac Windows PC handy. Once transferred onto a current Windows PC, the software worked flawlessly and instantly.
The most significant activity to complete before scanning is calibration. This function guarantees that the hardware and software are in tune with the imprecise positioning of the two ingredients comprising the ES360. Calibration includes placing this marker board on the turntable in numerous positions while running the calibration routine. It’s moderately simplistic and takes only a few minutes. You must do this anytime you transfer any of the scanner’s hardware components.
If you don’t perform the calibration method correctly, your scans will turn out remarkably misrepresented. Now you’re ready to study an actual part. I’ve found that the best outcomes occurred with light-colored objects.
Maximum Examine Dimensions 215x215x200mm (for automatic scan mode)
700x700x700mm (for free scan mode)
Automatic scan: <3mins
Free scan: <10sec (single range)
Point Length 0.17mm-0.2mm
Alignment Method: Automatic adjustment / Manual adjustment
Scan Mode two possible Modes: Automatic scan and free scan
There is Printing Support
The Resolution is 1.3 Megapixel
The Light Source is White light
It has Color Texture Scanning
The Scanner Dimensions are:
Scanner head size: 246x216x60mm
Weight: 7.7 lbs (3.5kg)
Power Consumption: 50w
AC Input: 100V-230V
Single Scan Range (Free Scan): 200x150mm
File Format STL, ASC, OBJ
ES360 Key Features:
≤0.1mm efficiency with light phase shifting technology.
Two Scan Options
The only two-scan-mode scanner on the market with automatic scan and free scan modes.
Scan Small to Large
It is an automatic scan mode limit examine size is 215x215x200mm.
Free scan system maximum scan measurement is 700x700x700mm.
Faster than Ever
Automatic scan uses less than 3 minutes to perform one circle, 3-4 times
faster than similar desktop 3D scanners in the market with turntable scans.
Manageable to Use
Anybody can browse; it’s easy, with just one “click”.
Ready to Print
Digital illustrations designed by the ES360 are willing to be printed on a 3D printer before-mentioned as the award-winning Afinia H480 or H800.
Eye Safety Lighting
White light scanning is far reliable than laser scanning. The white light generates by a projector very similar to those utilized in classrooms and agencies.
At fewer than 8 lbs (3.5kg), the ES360 can go anywhere.